Undersink systemsAvailable

Undersink Tankless RO System · 600 GPD

A compact direct-flow reverse osmosis system. Water is produced on demand, with no storage tank under the sink and automatic membrane flushing.

  • 600 GPD rated production
  • Direct flow · no storage tank
  • Three-stage treatment
  • 2:1 pure water to drain
Pricing
Pricing on requestQuoted per buyer based on volume and customisation.
Minimum order
To be confirmed in your quote
Shipping
Shipping terms are confirmed in your quote.
Warranty
12 months on the system (excludes replacement cartridges)
Get your Wholesale Rate

Technical data

Specifications

  1. 01Mains inlet
  2. 02PCB composite
  3. 03RO membrane
  4. 04CB post carbon
  5. 05To faucet

Stage 1

PCB composite

5 µm polypropylene sediment layer followed by coconut-shell activated carbon. Holds back sediment, rust and silt, then reduces free chlorine, taste and odour ahead of the membrane.

Typical replacement
6–12 months

Carbon rod raw material references NSF/ANSI 42 and NSF/ANSI 61 (material level).

Stage 2

RO membrane

3 × 13-inch reverse osmosis element. Reduces dissolved solids, heavy metals, inorganic salts and chemical residues.

Typical replacement
24–36 months

Membrane element references NSF/ANSI 58 (component level).

Stage 3

CB post carbon

Coconut-shell activated carbon rod. Final polish on taste and odour before the faucet.

Typical replacement
6–12 months

Carbon rod raw material references NSF/ANSI 42 and NSF/ANSI 61 (material level).

Cartridge life varies with incoming water quality and household consumption.

Performance

Rated production
600 GPD
Operation
Direct flow · no storage tank
Pure water to drain
2:1
Membrane flushing
Automatic · 30 s at power-on, 10 s after 24 h idle when full, 10 s per 5 min cumulative production, 30 s on demand

Unit

Dimensions
140 × 440 × 410 mm
Cabinet finish
Black and grey · specified at order
Pump
Internal DC booster pump
Control
Integrated waterway board with check valve
Protection
High-pressure switch and drain solenoid valve
Power supply
220–240 V · 50–60 Hz

Connections

Water inlet
3/8″
Pure and clean water outlets
3/8″
Drain outlet
1/4″ with drain clamp
Inlet tee
304 stainless · 1/2 × 1/2 × 3/8″
Faucet
Not supplied · sourced locally · 1/4″ connection
Feed water
Treated municipal mains water

Specified at order

  • Cabinet finish
  • Cartridge face labelling

Supplied with each unit

  • Fitting kit and hardware
  • Power adaptor
  • Tubing set
  • Installation manual
  • 1/4″ drain clamp
  • Specification is confirmed at the time of order.

Certification state

Certification

Component and material-level references only. The assembled system is not certified.

  • The RO membrane element references NSF/ANSI 58.
  • Carbon rod raw material and housing materials reference NSF/ANSI 42 and NSF/ANSI 61.
  • These references apply to components and materials only — they are not a certification of the assembled system.

Three short steps

Get your Wholesale Rate

Enquiring about Undersink Tankless RO System · 600 GPD. Pricing is quoted on your volume and customisation.

  1. 1Product
  2. 2Location
  3. 3Your details
Step 1 · Product and quantity

Units or sets. Minimum orders are confirmed in your quote.

Undersink systems

Undersink Tankless RO System · 600 GPDPricing on requestContact the Factory